Post that stacks grinding and flap discs with a 7/8 in arbor hole. Leave about 5 in of clearance around it. Hangs on the ModPro slotted wall panel (2 in slot columns, 1.5 in rows) with the standard two-hook mount: tip it in, swing down, drop about 0.2 in. Prints upright with no supports; rounded edges, true arcs. PETG or ASA recommended.
| File | Size | Version | Download |
|---|---|---|---|
| ModPro Grinder Disc Post, 7/8 in Arbor (1 column).step | 530.7 KB | 3 | Sign in to download |
Reviews
Sign in and download this model to rate it.
No reviews yet.
Download it, make it, and tell other makers how it went.
Made something from this? Publish it with "Based on another model" and paste this page's address as the original. It shows here as a remix.
In collections
ModPro Grinder Disc Post, 7/8 in Arbor (1 column)
Published Nov 17, 2026 · Version 3
Open in the viewerDownloading needs a free account and binds you to the license below.
File: STEP, 530.7 KB
Ask AI about it
Your AI reads StepFile.com once you connect it. How to connect
Specs
| File type | STEP |
|---|---|
| Size | 5.20 × 3.60 × 1.88 in |
| Volume | 6.17 in³ |
| Holes | None |
| Bends | None (not bent) |
| File size | 530.7 KB |
| Version | 3 |
| Updated | Nov 17, 2026 |
| Category | 3D print ready |
| Published | Nov 17, 2026 |
License
- Yes Share it with others
- Yes Change it and share the changed model
- No Use it for business
- Must credit the maker
Where this model came from
I designed this